Apple iMac G4 Flat Panel 15-inch (Original) - Manual (Page 33)

32
Install memory and an AirPort Card.
For detailed instructions, refer to Mac Help (see page 26).
2. Loosen the four captive screws at the
base of the computer and gently
remove the access panel. 1. Lay the computer down sideways on
a soft cloth. Be careful not to let the
base roll.
. Touch this metal before you touch any other
parts inside the computer. Don't walk around
the room until you've finished installing memory
or an AirPort Card. Before installing:
m Get a Phillips screwdriver
m Shut down the computer
m Unplug all cables, except the power cord
3. Touch a metal point inside
the computer. Then unplug
the power cord.
. For instructions on using the AirPort software,
choose Mac Help from the Help menu. Then
click the question mark and click AirPort Help.