JB Conversions 16-1207 HD Super Short SYE Kit for the NP241C - Manual (Page 2)

2
Applications:
• Use for installing Chevy NP241C into Jeep TJ, YJ, XJ requiring
electronic GM speedometer pickup
• Install in existing Chevy NP241C (truck) retaining original truck
electronic speedometer (driver's F/O only)
• Use for installing Chevy NP241C into custom chassis requiring
electronic GM speedometer pickup
Notes:
• This kit applies to driver's side front output only.
• Passenger side applications must use kit
#16-1205 .
Installation Instructions
Note: This kit can be installed without removing the transfer case
from the vehicle however it is recommended that the unit be removed
to ease installation of the SYE kit.
1) Drain the fluid from the transfer case. This kit can be installed while
the transfer case remains in the vehicle however, removal is
recommended for an easier installation.
2) Remove the 10mm bolts (4) holding the tail cone onto the bearing
housing (Fig.1).