BT Freestyle 1025 - Manual (Page 23)

19
ANS
WERING MA
CHINE
To cancel deletion from the base
Cancel deletion by pressing the STOP
button during the 8-0 countdown.
All messages will be saved including
any marked for deletion.
To delete all messages at the base
When all messages have been played
back you hear the announcement “End
of messages
” and the LED display counts
down from 8-0.
During the 8-0 countdown press DELETE .
At the end of the countdown you hear
the confirmation announcement
“All messages deleted”
.
Delete
Stop
Answer delay
Answer delay sets the number of times your
Freestyle 1025 will ring before answering a call.
The original setting is for your machine to
answer after 6 rings. You can change this setting
between 2-9 rings or Time Saver.
NOTE
If you set your 1025 Answer Delay to Time Saver
this means that when you call in from another phone
(remote access), if any messages have been recorded
your Freestyle 1025 will answer after only 2 rings.
If there are no messages, it will answer after 6 rings,
thereby allowing you the option of hanging up before
your Freestyle 1025 answers. In using Time Saver,
you can avoid the cost of a call.
To check the answer delay setting
at the base station
Press buttons in order shown
Press the SKIP > button.
Your Freestyle 1025 will announce the
current setting. “Calls will be answered
after 6 rings”
.
Skip
To change the answer delay setting
Press and hold the SKIP > button until
the current setting is announced “6”.
Keep holding the
SKIP > button and
your Freestyle 1025 will announce the
answer delay options: 7, 8, 9 “Time
Saver, 2, 3, 4, 5”.
When you hear the setting you want,
release the
SKIP > button. Your
Freestyle 1025 will then announce the
new setting e.g. “Answer delay, Time saver”
and return to ‘Answer on/off ’ mode.
Skip
Skip