Rock-Slide Engineering RIGID SERIES SKID PLATE User Manual
Page 2
INSTALLATION INSTRUCTION RSEI 112
NOTE: This skid plate is specifically designed to attach to the Rock-Slide Engineering
RIGID Series JK Bumper.
1. Push the screw nuts onto the three holes on the bottom of the bumper until the
holes line up. The threaded end of the nut screw nut faces upward
2. Place the skid plate with bolt holes against the bumper and so the skid plate is
hanging down. Put washers on the bolts and insert bolts into their respective
holes. Tighten bolts
Thank you for choosing Rock-Slide Engineering products. We value your business
and welcome your feedback/suggestions. If you have any concerns please contact
us directly @ 435-752-4580. We are here to help you!