Rock-Slide Engineering TJ CRAWLER FRONT BUMPER User Manual
Page 2
INSTALLATION INSTRUCTION RSEI 135
1. Remove stock bumper
2. If necessary, remove sway bar disconnect to allow bumper to fit
3. Place bumper on the stock frame rails and line it up with the stock mounting
points on top of frame rails
4. Attach bumper to the frame using the provided 3/8” hex bolts with flange
washers at the mounting holes on the bumper.
5. Tighten sway bar disconnect
6. If desired, attach winch to the bumper using the holes on the bumper and the
hardware provided with the winch
*If any parts listed are missing or damaged please call Rock-Slide Engineering @
435-752-4580 prior to installation
Thank you for choosing Rock-Slide Engineering products. We value your business
and welcome your feedback/suggestions. If you have any concerns, please contact
us directly @ 435-752-4580.