The airdog, Is equipped with a relay controlled wiring harness, Pureflow airdog airdog – PureFlow AirDog FP-150 - GM Duramax 2001-2010 User Manual
Page 19: Wiring diagram (in red), Figure 41 the airdog, Wiring harness, Figure 42, Securing the relay and fuse holder to the vehicle, Figure 43 figure 44
19
PureFlow AirDog
AirDog
®
FP-100 & FP-150 2001-2010 DuraMax Diesel
Section 6 Electrical Harness
The AirDog
®
is equipped with a relay controlled wiring harness.
WIRING DIAGRAM (In Red)
Figure 41
The AirDog
®
wiring harness!
AirDog® Pump Motor Lead
Pressure Sensor/Switch Lead
Indicator Light Lead
Battery Positive Lead
Battery Negative Lead
Mini Fuse Tap Relay Lead
Figure 42
CAUTION: If the OPTIONAL Low Pressure Indicator Light is not used, be sure to insulate
the two (2) #10 Indicator Light connectors to prevent accidental contact. The light kit is sold
separately and is not included in the kit.
Securing the Relay and Fuse Holder to the Vehicle
6-1.
Secure the relay and fuse holder to the vehicle.
Figure 43
Figure 44