PureFlow AirDog FP-150 - GM Duramax 2001-2010 - Manual (Page 12)

12
PureFlow AirDog
AirDog
®
FP-100 & FP-150 2001-2010 DuraMax Diesel
Section 5A Fuel Lines
5A-3. Attach, by pushing, the female 1/2” SAE J2044 quick connect end (Figure 16) of the
“Pressure Hose Assembly” onto the factory male quick connect that was disconnected
in step 5A-2 (Figure 15). You will hear a “click” when properly connected and the final
install will look like image 14.
Figure 16
5A-4. Insert the female quick connect end (see figure 17) of the “Pressure Hose Assembly”
into the male quick connect fitting previously installed in the port marked “ENGINE”.
You will hear a “click” when properly connected.
Figure 17
5A-5. Any excess fuel hose can be addressed by routing the hose in a fashion to take up the
extra length, or a section of the hose can be removed. Push lock splices have been
included if you choose to remove the excess hose.
Figure 18
CAUTION: Properly secure all fuel lines to prevent damage from chaffing and/or abrasion.