PureFlow AirDog FP-150 - GM Duramax 2001-2010 - Manual (Page 14)

14
PureFlow AirDog
AirDog
®
FP-100 & FP-150 2001-2010 DuraMax Diesel
Section 5-C Fuel Lines
Fuel Suction Line for AirDog
®
FP-100 Only!
NOTE: The AirDog
®
FP-150 requires a High Flow Suction Tube. If you are installing an
AirDog
®
FP-150 skip Section 5C and go to Section 5D for the High Flow suction tube
installation instructions!
5C-1. Insert the female quick connect end (see figure 22) of the “Suction Hose Assembly” to
the male fitting installed in the “Fuel In” port during step 4-3 of this manual. A “click”
will be heard when the fitting is properly connected.
Figure 22
5C-2. It may be necessary to remove or bend the metal fuel tank shield (Figure 23) to gain
access to the fuel tank suction line connection.
Figure 23
Fuel Tank Shield
5C-3. Route and attach the female ½” SAE J2044 end (Figure 25) of the “Suction Hose
Assembly” to the male quick connect fitting on the sending unit. You will hear a “click”
when properly connected.
Figure 25
5C-4 Any excess fuel hose can be addressed by routing the hose in a fashion to take up
the extra length. Push lock splices have been included if you choose to remove the
excess hose. Hose clamps are NOT required when using the hose splices.
PureFlow AirDog