PureFlow AirDog FP-150 - GM Duramax 2001-2010 - Manual (Page 16)

16
PureFlow AirDog
AirDog
®
FP-100 & FP-150 2001-2010 DuraMax Diesel
Section 5-D High Flow Suction Tube
INSTALLING THE HIGH FLOW SUCTION TUBE, cont’d
CAUTION: Select a location for the suction tube that has adequate clearance below the bed.
Also consider that under hard acceleration, fuel will migrate toward the back of the fuel tank.
Be sure the sending unit goes in the same way it was removed.
5D-1. Remove the sending unit from the fuel tank.
Figure 30 Figure 31
5D-2. Drill a 1-1/8” hole at the selected location in the fuel tank for the suction tube. Hold
a container below the drill point to catch debris.
Figure 32 Figure 33
5D-3. Remove all burrs from the edge of the hole.
Figure 34 Figure 35
5D-4. Install the grommet in the new suction tube access hole.