Cleaning debris from the gerotor assembly – PureFlow AirDog DF-165 - 6.0L Ford 2003-2007 User Manual
Page 19
19
PureFlow AirDog
AirDog
®
II Demand Flow Ford PowerStroke 2003-2007 6.0L
Section 9 AirDog®II Fuel Pump
Cleaning Debris from the Gerotor Assembly
Step 1 Step 2
Step 3
Remove the four (4) socket Carefully remove the O-rings, Remove and clean the gerotor.
head cap crews that secure you will need to re-use it.
Be very careful not to damage
the gerotor cap.
the gerotor.
Step 4
Step 5
Step 6
Remove the O-rings and clean
Replace the center gear.
Align and install the outer
the inside of the gerotor pocket
gear and O-rings.
Step 7
Step 8
1
4
3
2
Install the gerotor cap. Be very
Loose assemble the cap
careful not to dislodge or pinch
screws. Torque the cap
the O-rings.
screws in an opposing
pattern.