PureFlow AirDog FP-150 - Dodge Cummins 2005-2013 - Manual (Page 10)

10
PureFlow AirDog
AirDog
®
FP-100 & FP-150 Dodge 2005 - Present
Section 4 AirDog ® & Mounting Brackets
Installing the AirDog
®
& Mounting Brackets on the Truck’s
Frame, cont’d!
NOTE: The AirDog
®
can be mounted on either the inside or the outside of the frame, as
space or personal choice dictates.
Mount
The AirDog®
Outside
The
Frame
Figure 8 OR Figure 9
Inside
The
Frame
Figure 10 Figure 11
For this installation, the AirDog
®
is mounted inside the frame!
4-5. Clamp the frame between the AirDog
®
bracket assembly and the backing plate using
the bolts, lock washers, and nuts included in the kit.
Figure 12
4-6. Position the AirDog
®
on the frame as necessary for clearance.
NOTE: Be sure to mount the AirDog
®
so the ‘FUEL IN’ port is directed toward
the rear of the vehicle.
Figure 13A
Figure 13B
NOTE: Some pickup model frame rails have a bracket that is used to support the frame
during the manufacturing process If this bracket is on your frame rail and obstructs the
proper positioning of the AirDog
®
mounting bracket, you may remove part or all of it, as
needed. Be very careful not to damage the frame flange!