PureFlow AirDog FP-150 - Dodge Cummins 1994-1998 - Manual (Page 18)

18
PureFlow AirDog
AirDog
®
FP-100 & FP-150 Dodge Cummins 1994 - 1998
Section 5-E High Flow Suction Tube
INSTALLING THE HIGH FLOW SUCTION TUBE, C ont’d
NOTE: The fuel tank used for the pictures is an example only and may not be exactly the same
as your tank.
IMPORTANT: Select a location for the suction tube that has adequate clearance
below the bed. Also consider that under hard acceleration, fuel will migrate
toward the back of the fuel tank.
5E-1. Remove the collection basket.
Figure 46
Figure 47
5E-2. Drill a 1-1/8” hole at the selected location in the fuel tank for the suction tube. Hold
a container below the drill point to catch debris.
Figure 48 Figure 49
5E-3. Remove all burrs from the edge of the hole.
Figure 50 Figure 51
5E-4. Install the grommet in the new suction tube access hole.