Fast & Fluid Giotto Compact User Manual
Page 12
Fast & Fluid Management Srl
A Unit of IDEX Corporation
_______________________________________________________________________________________________
1155007C-it,en,fr.doc – 16/10/2003
12
1.- INTRODUCTION
Giotto manual dispenser is a product particularly developed for dosing the colourants for
building paints, some of its parts are particularly precise to guarantee dosing results in compliance
with the standard of the most important producers.
The base unit is the fluid ounce Y = 29.58 cc or the hybrid system Y = 31.23 cc.
The single dosing unit is composed of two coaxial indipendent pumps, the external one is able
to dose 5/6 ounces with a complete stroke, the internal one is able to dose 1 ounce if the division
is 1/48 or 1/4 of ounce if the division is 1/192 or 1/64.
It is important to follow the installation, user and maintenance instructions mentioned in this
manual to obtain constantly excellent dosing results.
2.- PACKAGING
In the pakaging of the " GIOTTO MANUAL DOSING SYSTEM" you will find the following
components:
A)
Body (6 pieces)
A1) -right side
A2) - left side
A3) - complete superior
plate
A4) - shelf
A5) - n. 1 tension rod
B)
Blocking
device
pre-
assembled on the shelf
C)
Drip tray pre-assembled on
the shelf
D)
Electrical
device
pre-
assembled on the shelf
E)
Turning table
F)
Boxes containing canisters
*)
Packet containing screws
and small parts
*)
Installation manual
*)
Packaging containing shelf
guides
*)
Packaging containing crank
–handles for turning table