ARB 3448200 - Manual (Page 7)

06-01-2005 Page 7 of 7 3782877
30. Connect the turn signal looms to the existing
turn signal loom with the Scotchloks supplied.
Test to ensure the turn signals function
correctly.
31. Once bar is correctly fitted, undo front bolts in
splash pan of vehicle, slide splash pan supplied
between and refit bolts and finger tighten.
32. Using 8mm hardware supplied, bolt splash pan
to front of underside of bar. When all bolts are
fitted, tighten firmly.
33. If driving lights are to be fitted, use extension
bar with ratchet, ¾” long reach socket to tighten
from cutout in bottom of center pan.
34. Winch handle is operated from underneath bull
bar from left-hand side of vehicle.