ARB WINCH BULL BAR - Manual

Last Rev Date: 11/05/2009 Page 1 of 13 Fitting instructions# 3786410
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
Part Number: 3421500 / 3421510
Fitting kit No: 6172348
Product
Description: ARB WINCH BULL BAR
Suited to
vehicle/s: TOYOTA 4 RUNNER YEAR MODELS 03 ON
WARNING
REGARDING VEHICLES EQUIPPED WITH SRS AIRBAG:
When installed in accordance with these instructions, the front protection bar does not affect operation of
the SRS airbag.
ALSO, NOTE THE FOLLOWING:
i This product must be installed exactly as per these instructions using only the hardware supplied.
i In the event of damage to any bull bar component, contact your nearest authorised ARB stockist.
Repairs or modifications to the impact absorption system must not be attempted.
i Do not use this product for any vehicle make or model, other than those specified by ARB.
i Do not remove labels from this bull bar.
i This product or its fixing must not be modified in any way.
i The installation of this product may require the use of specialized tools and/or techniques
i It is recommended that this product is only installed by trained personnel
i These instructions are correct as at the publication date. ARB Corporation Ltd. cannot be held
responsible for the impact of any changes subsequently made by the vehicle manufacturer
i During installation, it is the duty of the installer to check correct operation/clearances of all
components
i Work safely at all times
i Unless otherwise instructed, tighten fasteners to specified torque
ARB 4x4 ACCESSORIES
Corporate Head Office
42-44 Garden St Tel: +61 (3) 9761 6622
Kilsyth, Victoria Fax: +61 (3) 9761 6807
AUSTRALIA 3137
Australian enquiries [email protected]
North & South American enquiries [email protected]
Other international enquiries [email protected]
www.arb.com.au