3 installing the air locker – ARB RD119 User Manual

Page 16

Text mode
Original mode

3 Installing the Air Locker

NOTE :

You should feel no backlash between the ring and
pinion gears once the adjuster nut tightens.

Reverse the adjuster nut (counterclockwise) ¼ turn.

Insert one of the original adjuster nuts into the bearing cap on the

opposite side and hand tighten using the appropriate adjuster nut
wrench.

NOTE :

You should now feel some backlash between the
ring and pinion gears. If not, there might be a
clearance problem which is binding the carrier. Re-
check the clearance.