Fluid Management H-5 Mixer Digital Timer - Manual (Page 17)

MAINTENANCE PROCEDURES
H-5 Paint Mixer Operating & Instruction Manual 17
MAINTENANCE
PROCEDURES To ensure safe, dependable operation of the paint mixer, follow the
maintenance schedule detailed below:
If the motor encounters a mechanical overload condition, a thermal
limiter device will stop the motor. After the device cools, it could
unexpectedly start the motor.
Damage or injury could result if maintenance procedures other than
routine cleaning and belt tension adjustments are preformed by
unauthorized service representatives.
AS NEEDED
Cleaning:
• Clean all accessible inside surfaces with soap and water.
• Clean control panel surfaces with soap and water.
• Clean all outside cabinet surfaces with soap and water.
This mixer is equipped with an automatically
reset thermal limiter to protect the motor
against damage caused by overload
WARNING: ELECTRICAL HAZARD
All advanced maintenance procedures must
be preformed by an authorized service
representative.
CAUTION: ELECTRICAL HAZARD