Fluid Management H-5 Mixer Digital Timer - Manual (Page 15)

BASIC OPERATION
H-5 Paint Mixer Operating & Instruction Manual 15
BASIC
OPERATION 1. Open the door.
2. Place a can of paint in the mixer with the bail at the top.
3. Close the door. A safety switch prevents operation of the paint mixer
while the door is open.
4. Apply power to the paint mixer by pressing the POWER switch.
NOTE: When power is applied to the mixer, and when it is not in a mixing cycle,
the numeric display will show the number of cycles that the unit has been
operated.
5. Push one of the three (3) membrane mix pushbutton.
NOTE: The LIGHT membrane pushbutton switch is used for 120 seconds of
mixing time. The MEDIUM membrane pushbutton switch is used for
180 seconds of mixing time. The DARK membrane pushbutton switch
is used for 240 seconds of mixing time. At this point, the mixer will start
mixing. The appropriate indicator light will illuminate during the mixing
period and the numeric display will start counting down the remaining
time.
6. After the mixer has stopped, open the door and remove the container of
paint. Power need not be removed if the mixer is in frequent use.
Turn off power at the end of the working period.