Fluid Management 1500HS Accutinter - Manual (Page 9)

Fluid Management Customer Service 1 . 800 . 462 . 2466

Accutinter 1500 | 7
Important Safety Information
Grounding
This product must be grounded. In the event of an electrical short circuit, grounding
reduces the risk of electrical shock by providing an escape for the electric current.
This product is equipped with a cord that has a grounding wire and an appropriate
grounding plug. The plug must be inserted into an outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
Danger
Improper installation of the grounding plug can result in a risk of electric shock. If
repair or replacement of the cord or plug is necessary, DO NOT connect the
grounding wire to either flat blade terminal. The insulation wire with green or green
and yellow stripes on the outer surface is the grounding wire.
Check with a qualified electrician if the grounding instructions are not completely
understood, or if in doubt about whether the product is properly grounded. DO NOT
modify the plug provided. If it will not fit into the outlet, have the proper outlet installed
by a qualified electrician.
Caring for Your Computer
Disconnect the power plug on the computer (by pulling the plug, not the cord) if
any of the following conditions exists:
• You want to remove any parts.
• The power cord or plug becomes frayed or otherwise damaged.
• You spill something into the case.
• Your computer is exposed to rain, flooding, or any other excess moisture.
Keep the flat panel monitor in room temperature conditions. Excessive cold or hot
conditions can have an adverse effect on the liquid crystal display of the monitor.
Communication Regulation Information
Safety and regulatory compliance Information
See the affixed labeling on the machine. ETL Listed, conforms to UL STD 1450.
Certified to CAN/CSA STD C22.2 NO. 68.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
NOTE:
This product is for use on a dedicated nominal 120 Volt or nominal 220 Volt
circuit where applicable and has a grounding plug.
NOTE:
Review the weight limits referenced in your computer documentation before
placing monitor or other devices on top of your computer.
Warnings
• The AT1500 and AT1500
HS machines draw 5 amps
at 120 or 2.5 amps at
220/230 ± 10% VAC.
• DO NOT modify the
provided plug.
• Improper use of grounding
plug can result in risk of
electric shock.
• Hazardous moving parts.
Keep fingers and other
body parts away.
Cautions
• Check with a qualified
electrician or service person
if grounding instructions
are not completely
understood or if in doubt
as to whether product is
properly grounded.
• DO NOT use an adapter
or extension cord with
this product.
• This unit must be plugged
into a dedicated
electrical line.
• To reduce risk of electric
shock or injury, use
indoors only.
• Never force a connector
into a port. If the connector
and port do not join
with reasonable ease,
they probably do not
match. Make sure that
the connector matches
the port and that you have
positioned the connector
correctly in relation to the
port.