Hale Trailer - Manual (Page 17)

17 Safety - Skid & Trailer
p/n: 029-0810-00-0
Saf ety
❑
See separate documentation provided with the engine and pump and
gearbox assemblies for proper fluids to use and quantities required.
❑ DO NOT permanently remove or alter any protective feature, guard or
insulating devices, or attempt to operate the system when these guards
are removed.
Doing so voids the Hale warranty. Also see heading “Express Warranty”
on page 69.
❑ Any of the above could affect system capacity and/or safe operation of
the system and is a serious safety violation which could cause personal
injury or could affect safe operation of the system.
WARNING!
NO MODIFICATIONS MAY BE MADE TO THE HALE SKID OR TRAILER
ASSEMBLY WITHOUT PRIOR WRITTEN PERMISSION FROM:
Hale Products, Incorporated
Fire Suppression Division
700 Spring Mill Avenue
Conshohocken, PA 19428 U.S.A.
Telephone ..........610-825-6300
Fax .....................610-825-6440
Web.................... www.haleproducts.com
❑ Rotating drive line parts can cause injury. Be extremely careful that NO
part of your body (head, feet, arms, legs, fingers, hair, etc.) is in an area
of rotating parts where you could be subject to injury.
❑ Make sure proper personal protective equipment is used when operating
or servicing the apparatus.
WARNING!
BE SURE TO WEAR SAFETY GLASSES WHEN REMOVING AND/OR INSTALL-
ING FORCE (PRESS) FITTED PARTS. WEAR PROTECTIVE, HEAT-RESIS-
TANT GLOVES WHEN HANDLING PARTS THAT REQUIRE HEATING FOR
INSTALLATION AND/OR REMOVAL. FAILURE TO COMPLY MAY RESULT IN
SERIOUS EYE OR HAND INJURY.
DO NOT OVERHEAT PARTS CONSTRUCTED OF BRONZE (E.G. IMPELLER).
OVERHEATING (PART TURNS RED OR BLUE) CAN WEAKEN THE PART AND
IT MUST THEN BE REPLACED.