Hale SMR-U - Manual (Page 37)

SM R -AC In s talla tio n a n d Se tu p
❑
51 Addendum - SMR-AC CAFSPro Installation Guide
p/n: 029-0020-78-0
Addendum: SMR-AC Installation
This SMR-AC Installation Addendum is in addition to and is to be used in conjunc-
tion with the CAFSPro Installation Guide, Hale p/n: 029-0020-78-0. Additional
installation is required by the builder / installer as the Oil Separator Tank must be
externally mounted, requiring additional plumbing.
A.1 UNPACKING
The SMR-AC CAFSPro system is shipped primarily assembled on two
skids. One skid contains the main SMR-AC CAFSPro pump, manifold and
valve assembly. The second skid contains the FoamLogix Pump Unit, Air
Separator Tank, Gearbox, along with all supplied loose items.
Use care when removing the SMR-AC CAFSPro from its packaging (skid) to
prevent injury and/or damage to the system, especially the external system
connecitons.
IMPORTANT!
EXERCISE CARE DURING UNPACKING AND INSTALLATION TO PREVENT
INJURY AND/OR DAMAGE TO THE SYSTEM AND TO ENSURE THAT THE
IDENTIFICATION TAGS ARE NOT REMOVED BEFORE THE CONNECTIONS
ARE MADE.
DO NOT REMOVE OR ALTER ANY HYDRAULIC OR PNEUMATIC CONNEC-
TIONS WITHOUT WRITTEN APPROVAL FROM HALE PRODUCTS. ALSO SEE
SECTION “1 SAFETY PRECAUTIONS” BEGINNING ON PAGE 7.
Lifting the System
WARNING !
THE SMR-AC CAFSPRO PUMP SYSTEM IS HEAVY AND BULKY, POSSIBLY
WEIGHING OVER 2,000 LBS. (907 KGS.). CHECK BILL OF LADING FOR
APPROXIMATE WEIGHT. USE PROPER LIFTING SUPPORT DEVICES (OVER-
HEAD CRANE, STRAPS/CHAINS, ETC.) CAPABLE OF HANDLING THE LOAD
WHEN MOVING OR INSTALLING THE SYSTEM.
DO NOT ATTACH LIFTING APPARATUS TO THE SYSTEM MANIFOLDING.
ATTACH DIRECTLY TO THE FRAME.