30 playing – Philips VR674CAT User Manual
Page 30
POWER
EJECT
SPEED
VCR/TV
VCR
TV
CBL
/DBS
SLOW
X2 PLAY
F.ADV
TIME
INDEX
REC END
SKIP
MEMORY
1
2
3
4
5
6
7
8
9
0
CH.
VOL.
ALT.CH
REW
PLAY
F.FWD
REC
/OTR
PAUSE
/STILL
STOP
MUTE
TRACKING
VCR PLUS+
/ENTER
SEARCH
VAR.SLOW
MENU
STATUS
/EXIT
SMART
PICTURE
CLEAR
30 Playing
• If the tape you want to play is
already in the VCR, make sure the
VCR power is on and the VCR is in
VCR position. (The VCR light will
appear on the display panel. If it
does not, press the VCR/TV button
once.) Press the VCR button, then
press the PLAY/o button.
• Other playback options and fea-
tures are on pages 44-57.
• If REPEAT PLAY is ON, playback
will begin automatically when you
insert a tape, even when the record
tab is intact. (However, playback
will not begin if the VCR power is
off and a timer recording is set.)
Helpful Hints
Read and follow these steps to play a tape.
1
Turn on the TV and set it to channel 3 or 4
__
the channel to
which the CH3/CH4 switch on the back of the VCR is set.
2
Insert a tape in the VCR. The PWR., VCR, and Cassette-Inside
lights will appear on the display panel. If the tape’s record tab is
missing, playback will start automatically.
6
Press the EJECT button to remove the tape.
3
If playback does not start automatically, press the VCR
button, then press the PLAY/o button.
4
Press the STOP/p button to stop playback.
5
Press the REW(ind)/{ button to rewind the tape.
1
Turn on the TV.
2
Insert a tape in the VCR.
6
5
4
3
S-VHS Quasi Play Back (SQPB)
This unit has a SQPB function that allows you to view a tape you
recorded in S-VHS format. An S-VHS format tape will play the
same as a normal format tape. This unit automatically detects
whether the tape is in S-VHS format or in normal format.
When you play an S-VHS format tape on this unit, you can not get
the high resolution that would be available on an S-VHS VCR.
Noise lines (black and white streaks) may appear on the picture.