Philips VR674CAT - Manual (Page 16)

POWER
EJECT
SPEED VCR/TV
VCR TV
CBL
/DBS
SLOW X2 PLAY F.ADV
TIME INDEX REC END SKIP
MEMORY
1 2 3
4 5 6
7 8 9
0
CH. VOL.
ALT.CH
REW
PLAY
F.FWD
REC
/OTR
PAUSE
/STILL
STOP
MUTE
TRACKING
VCR PLUS+
/ENTER
SEARCH
VAR.SLOW
MENU
STATUS
/EXIT
SMART
PICTURE CLEAR
16 Setting the Clock
2
Press the MENU button.
There are two ways to set the clock. With manual clock setting, you
tell the VCR the current time. With automatic clock setting, the
VCR gets the current time from a PBS station. It keeps track of the
time by constantly referring to the time the PBS station broadcasts.
If you are using a Cable Box or Direct Broadcast System,
you must set the clock manually.
Follow the instructions under either manual clock setting (below) or
automatic clock setting (page 18) to set the VCR’s clock. If you use
AUTO CLOCK, follow the steps on page 19 to have the VCR main-
tain the clock according to your Time Zone. The channel that sup-
plies the time might broadcast from a different time zone. So, select
your Time Zone to ensure the clock is correct.
Before you begin, make sure:
● The VCR is hooked up and turned on, and channels are pro-
grammed into the VCR’s memory (see pages six-12).
● The VCR is in VCR position. The VCR light will appear on the dis-
play panel. If it does not, press the VCR/TV button once.
Do each step within 60 seconds of the previous step.
3
Press the PLAY/o button or the STOP/p button to select
SET CLOCK, then press the F.FWD/B button.
• To display the time on the TV
screen, press the STATUS/EXIT
button. Details are on page 26.
• The VCR may lose the clock setting
if the power fails.
• Until the clock is set, - - : - - may
appear on the VCR display panel.
Helpful Hints
Manual Clock Setting
4
Press the PLAY/o button or the STOP/p button to select
SET MANUAL CLOCK, then press the F.FWD/B button.
TIME – – : – –
DATE – – / – – / – –
TO END PUSH EXIT
1
Press the VCR button.
2
3-4
1
SELECT op CHOOSE B
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
AUTO DBS OFF
RECORD LINK
TO END PUSH EXIT
SET CLOCK
→
AUTO CLOCK [ON]
SET MANUAL CLOCK
DAYLIGHT SVG TIME [ON]
SET TIME ZONE
(AUTO)
TO CONTINUE PUSH MENU
SELECT op CHOOSE B
TO END PUSH EXIT