Philips BDH5011-74B - Manual (Page 36)

10.5 Variable and Fixed Audio
Output
Setting Output Using OSD
You can set the type of output this display
outputs from its audio output jack located in the
rear of the display. By using an OSD based
switch, you can easily choose between variable
or fixed audio outputs.
To set the audio output setting:
1. Press the MENU +/- keys on the remote or
the front control panel.
2. Use the ADJ +/- keys to navigate to SOUND
OSD sub-menu.
3. Use the MENU +/- keys to select the
AUDIO OUTPUT option.
4. Use the ADJ +/- keys to change setting
between FIXED or VARIABLE.
AUDIO OUTPUT
Sets the type of audio output sent from the
audio output jacks located in the rear of display.
•
VARIABLE
When set to Variable, audio output is
affected by the display’ sinternal audio
controls including bass, treble, surround, BBE,
bass extension, and volume.
• FIXED
When set to Fixed, the audio output
bypasses the display’s internal audio control
so that functions such as bass, treble,
surround, BBE, bass extension, and volume
controls have no effect.
10.6 Sound Adjustments
Sound Adjustments Using OSD
Sound adjustments are available to enhance the
sound performance of the display.These
adjustments will affect the display’s built-in
speakers and the AUDIO OUTPUT jacks when
set to ‘Variablel’ (see above section).To access
sound adjustments:
1. Press the MENU +/- keys on the remote or
the front control panel.
2. Use the ADJ +/- keys to navigate to SOUND
OSD sub-menu.
3. Use the MENU +/- keys to select the various
options described in this section.
36
User Manual BDH5011