Philips BDH5011-74B - Manual (Page 35)

10.4 Sleep Timer Settings
Setting Sleep Timer Using OSD
To set the sleep timer using the OSD screen:
1. Press the MENU +/- keys on the remote or
the front control panel.
2. Use the ADJ +/- keys to navigate to
ioOTHERl• OSD sub-menu as displayed
below.
3. Use the MENU +/- keys to navigate to SLEEP
function.
4. Use the ADJ +/- keys to set to ON.
5. The display will function normally until the
1-minute mark. At the 1- minute mark, the
sleep timer will display a second by second
count- down clock to notify you that the
display is about to turn off.
Sleep Timer On/Off
To turn on sleep timer, switch to ON position.
Toturn OFF sleep timer, switch to OFF.
Timer Setting
You can set the turn-off timer from 1 to 120
minutes. Use the ADJ +/- keys to set any number
between 1 and 120.
Setting Sleep Timer Using Remote Control
To set the sleep timer using the remote control:
1. Press the SLEEP TIMER key on the remote.
This will display the sleep timer display on
the upper right corner of screen.
2. Pressing the SLEEP TIMER key again will
cycle the sleep timer through all the preset
times.
3. When setting is complete, simply press the
DISPLAY key to hide the sleep timer display.
Your sleep timer is now running in the
background.
4. The display will function normally until the
1-minute mark. At the 1- minute mark, the
sleep timer will display a second by second
count-down clock to notify you that the
display is about to turn off.
5. If you wish to turn the sleep timer OFF
before it shuts itself off, simply press the
SLEEP TIMER key again and cycle through all
the preset times until SLEEP: OFF is
displayed.
SLEEP TIMER
0:59
Power Off Warning
SLEEP: OFF
Sleep Timer Set
SLEEP TIMER
0:59
Power Off Warning
35
User Manual BDH5011