Philips Glide Handheld Scanner SIC4014H - Manual (Page 7)

5
Scanning
1. Press and hold Power/Scan button to turn on the power.
Note:
CARD
message appears on the screen if no card is inserted.
2. Select (Setting) >
SCAN
(Scan Setting) > Direction to set the scan
direction to Up or Down.
3. Place the scanner fl at against the document with the scanning lens facing
down. Make sure the area you want to scan is between the Alignment
guides.
4. Press Power/Scan button to activate the Scan. The Scanning /
Scanning
scanning
icon appears.
5. Follow the arrow indication on the LCD screen to
slowly slide the scanner up or down and keep your
hand stable to get the best quality picture.
6. To stop scanning, press Power/Scan button again.
The scanned image will show on the screen and save
to the memory card automatically.
7. To start a new scan, repeat the steps 3~6.
Note:
• The progress bar status during the scanning:
Green Good scan.
Orange Poor scan. Lower the scan speed.
Exclamation mark Unsuccessful scan. Please re-scan.
Helpful Hints:
• Scan at a slow and constant speed to optimize scan quality.
• When scanning books or magazines, begin scan from the bind and glide
outward.