Philips 23PF9976I-37 - Manual (Page 23)

23
7.2 Using the remote control
Do the following steps to ensure that your remote control
is ready for operation.
1 Pull out the plastic insulation sheet from the battery
to enable the remote control to function.
2 Pull out battery cover and check whether the lithium
battery is placed correctly. The words on the battery
should face you when you remove the battery cover.
3 Insert battery cover and the remote control is now
ready for use.
Note : the battery supplied with the set does not contain
mercury or nickel cadmuim so as to protect the environment.
When discarding your batteries, use the recycling options
available.
Remote Control
23iF9946_12_StDFU_ENG.p65 8/31/04, 4:30 PM 23