Philips MC145C-37 - Manual (Page 14)

Tape counter
During the use of the tape deck a tape counter is displayed.
The counter should help you to find titles or passages on a
cassette. The counter can be reset to
000.
Displaying the counter during recording
• Press TAPE COUNTER during recording to switch
between the counter and the display of the source.
Resetting the counter
1 Press
9 (STOP 9 on the remote control) to stop
playback.
2 Press
9 (STOP 9 on the remote control) to reset the
tape counter.
➞
000 is displayed.
General information on recording
Recording is permissible provided that copyright or other
rights of third parties are not infringed upon.
For recording on this unit you should use a cassette of the
type NORMAL (IEC type
I) or CHROME (IEC type II). The
deck is not suitable for recording on cassettes of the type
METAL (IEC type IV).
The recording level is set automatically. The controls
VOLUME, INCREDIBLE SURROUND, DSC, and DBB do not
affect the recording.
At the very beginning and end of the tape, no recording will
take place in the 7 seconds during which the leader tape
passes the recorder heads.
Protecting tapes from accidental erasure
Keep the cassette side to be protected in front of you and
snap off the left tab. Now, recording on this side is no
longer possible.
To record again on this side of the cassette, cover the hole
with a piece of adhesive tape.
Recording from the radio
1 Press SELECT SOURCE repeatedly to display TUNER.
2 Tune to the desired radio station (see under “RADIO”).
3 Press PUSH to open the cassette compartment.
4 Insert a blank, unprotected cassette and close the
cassette compartment.
5 Press RECORD on the unit to start recording.
➞ RECORD is displayed briefly and
RECORD is shown.
6 Press
9 (STOP 9 on the remote control) to stop
recording.
English
TAPE DECK
14
PROGRAM
INCREDIBLE SURROUND
DBB
DSC
CD SYNCHRO
RECORD
REPEAT
REVERSE MODE
SHUFFLE
SIDE A/B
PRESET
TUNING
BAND
TIMER ON /OFF
RDS/NEWS
TAPE COUNTER
INCREDIBLE SURROUND
DBB
C