Brother HL-5280DW - Manual (Page 72)

4. Control Panel
64
NETWORK for HL-5280DW users
Submenu 1 Submenu 2 Menu Selections Options Descriptions
WIRED WIRED
ENABLE
ON
*/OFF
TCP/IP TCP/IP ENABLE ON
*/OFF
IP ADDRESS= ###.###.###.###
(000.000.000.000)
* 1
Enter the IP address.
SUBNET MASK= ###.###.###.###
(000.000.000.000)
* 1
Enter the Subnet mask.
GATEWAY= ###.###.###.###
(000.000.000.000)
*
Enter the Gateway address.
IP BOOT TRIES # (3)
IP METHOD AUTO
*/STATIC/RARP/BOOTP
/DHCP
Chooses the IP method that best
suits your needs.
APIPA ON
*/OFF Automatically allocates the IP
address from the link-local
address range.
1
IPV6 ON/OFF
*
ENET AUTO
*/100B-FD/100B-HD/
10B-FD
/10B-HD
Chooses Ethernet link mode.
NETBIOS/IP ON
*/OFF
SET
DEFAULT
Restores wired network settings of the internal print server to default.
WLAN WLAN
ENABLE
ON
*/OFF
TCP/IP TCP/IP ENABLE ON
*/OFF
IP ADDRESS= ###.###.###.###
(000.000.000.000)
* 1
Enter the IP address.
SUBNET MASK= ###.###.###.###
(000.000.000.000)
* 1
Enter the Subnet mask.
GATEWAY= ###.###.###.###
(000.000.000.000)
*
Enter the Gateway address.
IP BOOT TRIES # (3)
IP METHOD AUTO
*/STATIC/RARP/BOOTP
/DHCP
Chooses the IP method that best
suits your needs.
APIPA ON
*/OFF Automatically allocates the IP
address from the link-local
address range.
1
IPV6 ON/OFF
*
WIRELESS SECUREEASYSETUP YES
*/EXIT
The default settings are shown in Bold with an asterisk.