Bosch WFMC6401UC - Manual (Page 28)

28
Troubleshooting of Minor Faults
d
WARNING
d
TO AVOID
RISK OF ELECTRIC SHOCK!
Repairs should only be carried out
by an authorized technician.
If repairs are necessary, and you
cannot eliminate the fault yourself with
the aid of the following table:
q Turn the program selector to Off.
q Disconnect the washing machine
from the power outlet.
q Turn off the water taps.
q Call Customer Service
(refer to Page 31).
Fault Possible cause Action
The door cannot be
d
No final spin" selected. Select Drain or Spin.
opened. Child lock activated. Deactivate child lock; see Page 23
Power failure. An interrupted program will be resumed when power is
restored. If the laundry is to be removed during a power
failure, call Customer Service
(refer to Page 31).
Program is running and/or the door is locked for safety
reasons.
Wait until the program ends; see Page 24.
Plug is loose or not inserted. Eliminate the cause.
Program selector turned to Off before end of program. Select a program.
Door cannot be opened,
even though the appliance
has been switched off and
on again.
Child lock activated. Deactivate child lock, see Page 23.
Door cannot be opened,
even though the appliance
has been switched off and
on again.
For safety reasons the door has been locked because the
water level, temperature or drum speed is too high.
See "Adding to the laundry/Interrupting the program",
Page 24 .
Program continues running,
even though the appliance
has been switched off and
on again.
Child lock activated. Deactivate child lock; see Page 23.
Appliance cannot be
operated. "Child lock
activated" as indicated in
the display field.
Child lock activated. Deactivate child lock; see Page 23.
Control lights do not light A fuse has blown. Reset circuit breaker. g g
up. Call Customer Service if this fault recurs.
Power failure. An interrupted program will be resumed when power is
restored. If the laundry is to be removed during a power
failure, call Customer Service
(refer to Page 31).
Appliance is in energyĆsaving mode.
This is not a fault.
Press the Select button; energyĆsaving mode is
terminated.
Program does not start.
Start/Pause indicator light
flashes.
Start/Pause button not pressed. Press the Start/Pause button.
Program does not start. Door not closed properly. Check whether laundry is trapped in door.
"Check Door !" indicated in
the display field.
Close the door (a click should be heard).
Program continues.
"Press start" is indicated in
the display field.
End time selected but still not activated by pressing the
Start/Pause" button.
Press the Start/Pause button.