Bosch WFMC6401UC - Manual (Page 23)

23
q To deactivate the signal, when the
display indicates Signal: max",
hold down the Select button, after
10 seconds the display indicates
Signal: off".
i The selected setting is retained
after the washing cycle.
You can select other settings by
pressing the Menu button and change
them by pressing the Select button.
q Press the Start/Pause button.
The program starts.
The indicator light is lit.
i The individual program steps are
indicated in the display field.
Child lock
You can secure your washing machine
to prevent selected functions from
being changed inadvertently .
If the child lock has been selected:
- No changes can be made while
the program is running.
- The door remains locked at the
end of the program.
Activating the child lock
q Turn the program selector to
switch on the appliance.
q Press the Menu button until Child
lock: off" is displayed.
The 
G
" symbol flashes.
q Press the Select button until
Child lock: on" is displayed.
When the menu is left, the 
G
"
symbol is permanently displayed.
i You can set child lock on/off
before starting a program or in
Pause" mode only.
Starting a program with child
lock: on"
q Turn the program selector to the
desired program.
q Load the laundry and close the
door.
The Start/Pause indicator light
flashes (red).
q Press the Start/Pause button and
hold down (5 seconds).
The program starts. The indicator
light is lit (red).
The child lock is activated.
i To deactivate the child lock
temporarily press the Start/Pause
button again(5 seconds) until the
Start/Pause indicator light flashes.
Now you can change programs or
options. Press the Start/Pause
button to reactivate the child lock.
i You can stop a running program
with activated child lock turning
the program selector to off"!
When you switch it on again the
interrupted program will continue.
Unloading laundry at the end
of a cycle with child lock: on"
q Press the Start/Pause button and
hold down (5 seconds).
You can open the door and
remove laundry.
The child lock setting remains
activated even if you switch off the
appliance.
i Next time you switch on the
appliance child lock is activated.
The door is locked and no
changes can be selected.
Press the Start/Pause button
(5 seconds) to open the door.
Deactivating the child lock
q Turn the program selector to the
desired program to switch on the
appliance.
q Press the Menu button until Child
lock: on" is displayed.
The 
G
" symbol flashes.
q Press the Select button until
Child lock: off" is displayed.
i You can set child lock on/off
before starting a program or in
Pause" mode only.