During washing, Rećselecting a program, Add a garment / interrupting the program – Bosch WFMC6401UC User Manual
Page 24: Canceling the active program
24
During Washing
i
Due to the highly engineered
suspension of this appliance, it
may experience a shudder or
shake when progressing from
lower to higher spin speeds.
This behavior is normal due to
shifting of the drum system and
should not cause concern.
ReĆselecting a program
q If the child lock is active, tempoĆ
rarily deactivate it.
See page 23.
q Turn the program selector to Off.
q Turn the program selector to a
newly selected program.
The Start/Pause indicator light
flashes.
q If the child lock is active,
deactivate again temporarily.
q If required, change the settings.
See Page 23.
q Press the Start/Pause button.
The program starts.
The indicator light is lit.
Add a garment /
Interrupting the program
You can put laundry in the drum after
washing begins, take laundry out of the
drum early or interrupt the program at
any time.
i
It is not recommended to add
laundry after the washing phase is
complete.
Without child lock
i
You can add or reduce laundry as
long as the Start/Pause indicator
light flashes (red).
q Press the Start/Pause button.
The following displays are
indicated in succession:
Pause",
Door can be opened".
q Open the door.
q Add/remove the laundry.
q Close the door.
q Press the Start/Pause button.
The program continues.
The indicator light is lit (red).
i
When the Start/Pause indicator
light is lit (red), the program can be
interrupted, however the door
cannot be opened for safety
reasons (water level, temperature
or drum speed too high).
The following displays are
indicated in succession:
Pause",
Door cannot be opened".
i
If the speed is too high, the
Start/Pause indicator light is lit
(red). Laundry can be added in
Pause" mode when the drum is at
a standstill.
Child lock activated
q Press the Start/Pause button and
hold down (5 seconds), child lock
is deactivated and program will be
interrupted.
i
If the Start/Pause indicator light is
lit (red), the door cannot be
opened for safety reasons (water
level, temperature or drum speed
too high).
The following displays are
indicated in succession:
Pause",
Door cannot be opened".
i
If the Start/Pause indicator light
flashes (red), the laundry can be
added or removed.
The following displays are
indicated in succession:
Pause",
Door can be opened".
q Open the door.
q Add/remove the laundry.
q Close the door.
q Press the Start/Pause button.
Program continues.
Child lock is reactivated.
The indicator light is lit (red).
Canceling the active
program
If you would like to terminate a program
and remove the laundry:
q Press the Start/Pause button and
hold down (5 seconds) if child lock
is active.
q Turn the program selector to Drain
or Spin.
i
If a program is interrupted at a high
temperature, allow the laundry to
cool down until doorglass is not
too hot to touch.
q Press the Start/Pause button.
q Wait until the program ends.
q Press the Start/Pause button and
hold down (5 seconds) if child lock
is active.
q Open the door.
q Unload the laundry.
i
If a program is interrupted at a high
temperature, the door may remain
locked until the appliance has
cooled down.
i
If the program is terminated by
switching off the appliance, the
door may remain locked.