Philips HTS3530-05 - Manual (Page 17)

15
8 Product specifications
Note
• Specification and design are subject to change
without notice.
Region code
The type plate on the back or bottom of the
home theatre shows which regions it supports
Playback media
DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R
DL, CD-R/CD-RW, Audio CD, Video CD/SVCD,
Picture CD, MP3-CD, WMA-CD, DivX-CD, USB
storage device
File Format
• Audio: .mp3, .wma
• Video: .divx, .divx ultra, .mpeg, .mpg
• Picture: .jpeg, .jpg
Amplifier
• Total output power: 600 W RMS (30%
THD)
• Frequency response: 20 Hz-20 kHz
• Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
• Input sensitivity:
• AUX: 2 V
Country DVD
Europe, United Kingdom
Latin America
Australia, New Zealand
Russia, India
China
Asia Pacific, Taiwan, Korea
7 Update software
To check for new updates, compare the current
software version of your home theatre with the
latest software version (if available) on the Philips
web site.
Check software version
1
Press SETUP.
2
Select [Preference Setup] > [Version Info.],
then press OK.
» The software version is displayed.
Update software from a CD-R
or USB
1
Check for the latest software version on
www.philips.com/support.
• Search for your model and click on
‘software&drivers’.
2
Download the software onto a CD-R or
USB storage device.
3
Insert the CD-R or connect the USB
storage device to the home theatre.
4
Follow the instructions on the TV to
confirm the update.
» When complete, the home theatre
automatically switches off and on again.
• If not, disconnect the power cord for a
few seconds and then reconnect it.
Caution
• Do not turn off the power or remove the
CD-R or USB storage device when the
software update is in progress because you
might damage the home theatre.
English
EN