Philips Micro Hi-Fi System - Manual (Page 25)

25
Set the sleep timer
1
When the soundbar is turned on, press
SLEEP repeatedly to select a set period of
time (in minutes).
The soundbar turns off automaticaly
after the set period of time.
»
Enable/disable automatic on/
standby
This feature only applies to AV devices or
TV with audio connection to the soundbar.
The soundbar can detect the state of AV
devices that are connected through the audio
connectors.
When automatic on/standby is enabled:
If an AV device turns on, the soundbar
turns on automatically.
To enable
When the soundbar is turned on,
press and hold SOURCE on the front
panel for more than 2 seconds.
To disable
1
When the soundbar is turned on, press
and hold SOURCE on the front panel for
more than 2 seconds again.
Set the alarm timer
1
Ensure that you have set the clock
correctly.
2
In standby mode, press and hold TIMER.
The hour digits are displayed and begin
to blink.
3
Press + VOL - to set the hour.
The minute digits are displayed and
begin to blink.
4
Press + VOL - to set the minute.
5
Press TIMER to confi rm.
6
To activate the wake-up timer, press + VOL
- to select [ON] (on).
A clock icon appears on the display.
The soundbar turns on automatically
at the set time and switches to the last
selected source.
To deactivate the alarm timer, select [OFF]
(off) at step 6.
•
»
»
»
»
•
English
EN