Philips TSU7000-37 - Manual (Page 60)

User Guide
60
Maintaining ProntoPro NG
Important Notices
Take care not to scratch the touch screen
Use your finger to tap the touch screen or use plastic-tipped pens intended for use
with touch screen.
Never use an actual pen, pencil or other sharp object on the touch screen.
Protect ProntoPro NG from temperature extremes
Keep ProntoPro NG away from heaters and other heat sources.
ProntoPro NG is not waterproof
ProntoPro NG should not be exposed to rain or moisture.
Do not store or use ProntoPro NG in any location that is extremely damp or wet.
When you have spilled water on ProntoPro NG, you have to take out the battery
pack and let ProntoPro NG dry for 48 hours before you insert the battery pack
again.
The touch screen of ProntoPro NG contains a glass element
Do not drop ProntoPro NG or subject it to any strong impact.
Cleaning ProntoPro NG
■ Use a soft, damp cloth to clean ProntoPro NG.
■ If the touch screen of ProntoPro NG is spoiled, clean it with a soft cloth
moistened with a diluted window-cleaning solution.
■ Do not use a corrosive detergent or an abrasive sponge.
■ Avoid the use of abundant water.
Upgrading ProntoPro NG
You can find the latest upgrades of your ProntoPro NG software (when available)
on http://www.pronto.philips.com. Navigate to the Downloads section. If you are
already registered you can enter your username and password to log in. Otherwise
you can register and become a ProntoZone member for free.
TSU7000_US1004.qxd 19-10-2004 16:09 Pagina 60