Philips TSU7000-37 - Manual (Page 24)

User Guide
24
Learning a Button
1 Tap and hold the ProntoPro NG icon in the upper left corner of the
touch screen for 3 seconds.
The Tools Menu appears.
2 Tap in the Tools Menu.
The ‘Learn Tool’ screen appears.
3 Tap .
The last page you have visited appears.
4 Navigate to the Device and the Page that contains the button you want
to learn.
5 Position ProntoPro NG and the remote control as illustrated above.
Note Make sure that you aim ProntoPro NG’s learning eye at the remote control’s
IR window.
The distance between ProntoPro NG and the remote control should be
between 2 and 8 inches (5 and 20 cm).
6 Tap the button you want to learn.
A Learning indication appears in the upper right corner of the touch screen.
7 Press and hold the key on the other remote control for 1 second.
Make sure you press the key within 5 seconds.
If learning succeeded, you will get an OK message.
If learning failed, you will get a Failure message.
See ‘ProntoPro NG will not learn commands’ on page 58 for more information.
8 When you want ProntoPro NG to learn other buttons, repeat steps
6 and 7.
9 Press the left firm key labeled below the touch screen to stop
learning.
Learning a Device Action
1 Tap and hold the ProntoPro NG icon in the upper left corner of the
touch screen for 3 seconds.
The Tools Menu appears.
2 Tap in the Tools Menu.
The ‘Learn Tool’ screen appears.
3 Tap .
The Device Overview appears.
Customizing ProntoPro NG
TSU7000_US1004.qxd 19-10-2004 16:09 Pagina 24