Getting started, Setting up progressive scan feature, Continued) – Philips DVP1120-37 User Manual
Page 19
E
ng
li
sh
19
Getting Started
(continued)
Setting up Progressive Scan
feature
(for Progressive Scan TV only)
The progressive scan displays twice the
number of frames per second than
interlaced scanning (ordinary normal TV
system). With nearly double the number
of lines, progressive scan offers higher
picture resolution and quality.
Before you start...
– Ensure that you have connected this
unit to a progressive scan TV using the
Y Pb Pr connection (see ‘Option 2: Using
Component Video jacks (Y Pb Pr)’ ).
A
Turn on the TV to the correct viewing
channel for this unit.
Make sure that the TV progressive
scan mode is turned off (or set to
interlaced mode). Refer to your TV user
manual.
B
Turn on this unit and press SETUP on
the remote control.
C
Use
keys to select { Video } menu
and press .
D
Move to { Video Out } in the menu and
press .
Aspect Ratio
:
4:3
View Mode
:
Auto Fit
TV System
:
NTSC
Smart Picture :
Language
Video
Audio
Misc
Rating
Video Out
Interlaced
P-Scan
E
Select { P-Scan } and press OK to
confi rm.
Read the notifi cation message on the
TV.
F
Use to select { Yes } in the menu
and press OK to confi rm.
There will be no picture on your TV
at this state until you have turned
on the progressive scan mode on
your TV.
G
Turn on your TV progressive scan mode.
(refer to your TV user manual.)
A message appears on the TV.
H
Use to select { Yes } in the menu
and press OK to confi rm.
The setup is now completed and you
can start to enjoy the high quality picture.
If no picture is displayed
A
Press ç on this unit.
B
Press numeric keypad ‘1’ on the
remote control.
Helpful Hints:
– If a blank/distorted screen appears, wait
for 15 seconds for the auto recovery.
– There are some progressive scan TV that
are not fully compatible with this unit,
resulting in an unnatural picture when
playing back a DVD VIDEO disc in the
progressive scan mode. In such a case, turn
off the progressive scan feature on this unit
and your TV.
1_dvp1120_37_eng 8.indd 19
1_dvp1120_37_eng 8.indd 19
2008-01-18 1:16:18 PM
2008-01-18 1:16:18 PM