Philips DVP1120-37 - Manual (Page 16)

E
ng
li
sh
16
Connecting to an Analog
Stereo System
You can connect this unit to a two
channel stereo system (e.g. mini system,
analog receiver) in order to enjoy stereo
sound output.
A Connect the audio/video cables
(supplied) from the VIDEO AUDIO
L/R jack on this unit to the Audio In
jacks (red/white) on your connecting
device. Leave the yellow video plug
disconnected.
B For video connection, see ‘Basic
Connections - Step 1: Connecting to
television’ for details.
Helpful Hint:
– See ‘Setup Menu Options - Audio Menu’
for optimum audio settings.
Optional Connections
Connecting to a Digital AV
Amplifi er/Receiver
You can connect this unit to an AV
amplifi er/receiver in order to enjoy
quality sound.
A Connect a coaxial cable (not supplied)
from the COAXIAL jack on this unit to
the digital coaxial input jack of the
connected device.
B For video connection, see ‘Basic
Connections - Step 1: Connecting to
television’ for details.
Helpful Hint:
– You have to set the appropriate Digital
Audio Output setting. Otherwise, no sound or
interference may occur. See ‘Setup Menu
Options - Audio Menu - Digital Output’ for
details.
AV Receiver
AUDIO
IN
DIGITAL
STEREO
AUDIO
IN
DIGITAL
Audio
(red/white plugs)
1_dvp1120_37_eng 8.indd 16 1_dvp1120_37_eng 8.indd 16 2008-01-18 1:16:17 PM 2008-01-18 1:16:17 PM