Philips 10002865 - Manual (Page 7)

5
1 2 3
4
7
6 5
INSTALLATION
Insert the plug into the socket
located on the back of the machine
and insert the other end into a
power outlet with suitable current.
Place a container beneath the hot
water/steam wand.
Remove the coffee bean hopper
lid.
Fill the hopper with coffee beans.
Close the lid pushing it down
completely.
Remove the water tank.
Install the water fi lter as
recommended on page 7.
Press the main power button to the
“ON” position.
Make sure the power button is not pressed and the machine is turned off. Check the machine
features on the label on the bottom of the appliance.
Fill the tank with fresh drinking
water. Do not exceed the “max”
level indicated on the water tank.
Once fi lled, place the tank back
into the machine.
STARTING THE MACHINE
The machine automatically primes the water circuit.
The machine is now ready for use.
Water may not be dispensed into the container.
This should not be considered a malfunction.