Maintenance – Philips 10002865 User Manual

Page 28

Turn the knob until it is in the rest

position ( ).

MAINTENANCE

Check the quantity of water contained in the tank and,

if desired, install the water fi lter again or re-insert the

small white fi lter (see page 7).

When descaling is complete, return to the main menu

to brew beverages.

Brew Group Washing

> maintenance > group wash

This function is used to clean the machine’s internal circuits used for brewing coffee.

To rinse the brew group, simply clean with water as shown on page 28. This wash completes the

maintenance process of the brew group. We recommend performing this cycle on a monthly basis (or

every 500 coffees), using the Saeco tablets, which can be purchased separately.

Note: before performing this function make sure that:

1. a large enough container is positioned under the spout;

2. the appropriate tablet for cleaning the brew group has been inserted into the

pre-ground bypass doser;

3. the water tank contains a suffi cient quantity of water.

THE WASH CYCLE CANNOT BE INTERRUPTED.
A PERSON MUST BE PRESENT DURING THE OPERATION.

Insert the cleaning tablet as shown

above.

Press

to start.

Wait for the cycle to begin.

The brew group has been washed. To exit
the programming mode, press the MENU
button (see page 20).

Please refer to page 22 to access

the “group wash” menu.

Press the

button to confi rm.

You can check the status of the

cleaning cycle on the display.

3.3.1 group wash

execute now

insert tablet

and press ok

group wash

please wait

passage

[2/3]

wash completed

please wait

3 maintenance