Philips 10002865 User Manual
Page 27
25
7
8
9
10
12
13
14
15
11
When the above message
appears, the boiler is at the right
temperature.
insert descaler
ok to start
Pour the descaling solution into
the tank. Insert the tank into the
machine.
Press the
button to start.
insert descaler
ok to start
When the solution is fi nished the
following message appears on
the display:
Remove the water tank, rinse
with fresh drinking water to
eliminate traces of descaling
solution, then refi ll with fresh
drinking water.
The machine begins to dispense
the descaling solution through the
hot water/steam wand. The
dispensing occurs at predetermined
intervals, in order to allow the
solution settle.
descaling cycle
please wait
The intervals are displayed in order
to check the progress of the
descaling cycle.
passage
[ 6/15]
fill the
water tank
Insert the tank back onto the
machine.
Rinse the machine’s circuits by
pressing the
button.
The machine performs the rinse
cycle. During the rinse cycle, the
machine may require the water
tank to be fi lled.
When the rinse cycle is fi nished the
above screen appears. Then the
display shows the maintenance
screen.
rinse cycle
ok to start
rinse cycle
please wait
rinse cycle
completed