Broilmaster D3-1 - Manual (Page 15)

B100691-4-0606 Page 15
Connecting to Propane Gas
Position the cylinder in the opening in the bottom of the
cart and secure with the cylinder retaining bracket. Figure
10.
Attach the pressure regulator to the Propane gas cylinder’s
valve using the plastic handwheel. Tighten in a clockwise
motion to achieve a gas tight seal. Figure 11.
Caution: Do not use a wrench or any other tool to
tighten. Use of a wrench or other tool will damage the
plastic handwheel.
To disconnect the Propane gas cylinder, turn OFF the
cylinder’s valve and the grill’s control valve. Remove
the regulator by turning the plastic handwheel counter-
clockwise.
The pressure regulator has an outlet pressure of not more
than eleven (11") inches water column. It must be con-
nected to the Propane gas cylinder’s female valve outlet
before the grill can be operated.
Caution: Operation of a Propane gas grill without the
pressure regulator and hose assembly will cause gas
leaks which could lead to fire or explosion, resulting
in property damage or personal injury.
The pressure regulator’s fitting must remain clean and
free of nicks and scratches. A dirty, nicked or scratched
fitting can cause a gas leak, resulting in an explosion or
fire. Use only genuine Broilmaster ® replacement parts
unless otherwise specified by the manufacturer.
Pressure Regulator and Hose
Assembly
Connecting to Propane Gas
(Continued)
Figure 11
P
ROPANE
G
AS
G
RILLS
Figure 10
Clockwise
Clockwise
Cylinder
Retaini ng
Bracket
Cylinder
Retaining
Bracket