Broilmaster D3-1 - Manual (Page 12)

Page 12 B100691-4-0606
G
RILL
A
SSEMBLY
Installing Racks
Place the briquet rack on the burner assembly.
Position the ceramic briquets evenly on the briquette rack
without overlapping.
Set the multilevel cooking grids Figure 8.
6
7
8
Figure 8
Installing Char-Master Briquets
Individually place the ‘Char-Master’ briquets in a single
layer evenly on your grill’s briquet rack; DO NOT dump
them onto the briquet rack. A single layer of ‘Char-Master’
briquets is all that’s needed. DO NOT overlap or stack the
briquets. See Figure 11.
After properly placing the ‘Char-Master’ briquets on your
grill’s briquet rack, there may be some briquets left over.
Save them for future use.
Before cooking, always preheat the grill as directed by the
grill’s operating instructions. Hot briquets cause better,
quicker cooking and better flavor.
Cleaning
Routine preheating and routine burn-off (also called pos-
theating) of a grill will clean the ‘Char-Master’ briquets.
Periodically turn the briquets over while they are cool.