Broilmaster P4 - Manual (Page 11)

P3, P4 Page 11
G
RILL
A
SSEMBLY
Installing Racks
Place the briquet rack on the burner assembly.
Position the ceramic briquets evenly on the
briquette rack without overlapping.
Set the multilevel cooking grids F IGURE 17.
17
5
4
F
IGURE
17
Grid Lifter
Assemble the grid lifter as shown. F
IGURE
18.
When positioning or removing grids always use the
grid lifter provided with your grill.
38
37
38
37
F
IGURE
18
Installing Char-Master
Briquets
Individually place the ‘Char-Master’ briquets in a
single layer evenly on your grill’s briquet rack;
DO NOT dump them onto the briquet rack. A
single layer of ‘Char-Master’ briquets is all that’s
needed. DO NOT overlap or stack the briquets.
See F
IGURE
17.
After properly placing the ‘Char-Master’ briquets
on your grill’s briquet rack, there may be some
briquets left over. Save them for future use.
Before cooking, always preheat the grill as
directed by the grill’s operating instructions. Hot
briquets cause better, quicker cooking and
better flavor.
Cleaning
Routine preheating and routine burn-off (also
called postheating) of a grill will clean the ‘Char-
Master’ briquets. Periodically turn the briquets
over while they are cool.