Philips HTS5800H-37 - Manual (Page 67)

E
ng
li
sh
67
AUDIO settings (underlined options are the factory default settings)
Setup Menu Options
(continued)
Press to access this menu and use keys to select one of
the options.
{ RAW } – Select this if you have used the recorder’s COAXIAL
OUT jack to connect to a multichannel receiver.
{ LPCM } – Select this if you have used the recorder’s COAXIAL
OUT jack to connect to a stereo or audio/video
system.
This setting allows you to select between two levels:
{ LPCM 48 kHz} – Select this if the connected audio device is
capable of processing digital signal input with
sampling rates of 48 kHz. In addition, the disc
you are playing back must be recorded in 48kHz
LPCM format.
{ LPCM 96 kHz} – Select this if the connected audio device is
capable of processing digital signal input with
sampling rates of 96 kHz.In addition, the disc
you are playing back must be recorded in 96kHz
LPCM format.
SPDIF Output
LPCM Output
PREFERENCES settings (underlined options are the factory default settings)
Press to reset the menu settings of this recorder.
A warning message will appear. Select
OK OK in the menu to
proceed or OK CANCEL to abort, then press OK to confi rm.
The screen saver prevents damage to the TV screen by
avoiding exposure to a static image for too long.
Press to access this menu and use keys to select one of
the options.
{ On } – Select this if you wish to turn off the TV screen, after
playback had been stopped or paused for more than
15 minutes.
{ Off } – Select this to disable the screen saver.
Reset Menu settings
Screensaver
TIPS: The underlined option is the factory default setting.
Press to go back to previous menu item. Press SETUP to exit the menu.