Philips DVDR3505-37 - Manual (Page 40)

40 EN 40 EN
4 Use [K / L] or [the Number buttons]
to enter the start and end time, then
press [B].
1/1
New Program Date
JAN/02
CH
DTV125. 1
Mode
SP
SP 2 : 00
Start
12 : 00AM
End
- - : - -
5 Use [K / L / s / B] to select analog
(“- - -”) / digital (“DTV”) mode or
external input (E1 / E2), then press
[B].
e.g.) external input mode
1/1
New Program Date
JAN/02
CH
E1
Mode
SP
SP 1 : 00
Start
12 : 00AM
End
1 : 00AM
To record from external input (e.g., cable/
satellite box), select E1 or E2.
Use [K / L] to select the channel number to
record.
For digital mode, select both major and minor
channels. Refer to “How to select a channel
number for the timer recording” on page 41
for more details.
e.g.) analog mode
1/1
New Program Date
JAN/02
CH
10
Mode
SP
SP 1 : 00
Start
12 : 00AM
End
1 : 00AM
e.g.) digital mode
1/1
New Program Date
JAN/02
CH
DTV125. 1
Mode
SP
SP 1 : 00
Start
12 : 00AM
End
1 : 00AM
6 Use [K / L] to select a recording
mode.
1/1
New Program Date
JAN/02
CH
DTV125. 1
Mode
SP
SP 1 : 00
Start
12 : 00AM
End
1 : 00AM
Refer to “Recording Mode” on page 35.
• You can check the remaining recordable space
of the disc when you select the recording mode.
Date
JAN/02
CH
DTV125. 1
Mode
SP
SP 1 : 00
Start
12 : 00AM
End
1 : 00AM
Auto recording mode select...
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
determines the appropriate recording mode to
complete recording the program.
1/1
New Program Date
JAN/02
CH
DTV125. 1
Mode
Auto
Auto 0 : 00
Start
12 : 00AM
End
1 : 00AM
• “Auto” is only available for one program in the timer
program list.
• The recording may be cut short when the available
recording space of the disc is too limited.
7 Press [OK] when all items are
entered.
After displaying a warning message for a few
seconds, timer program list will appear.
Press STANDBY-ON to Timer Standby mode.
Timer Programming
MON JAN/01 11:00AM SP (1:00)
JAN/ 2/07 12:00 AM 125.1 SP
Date Start End CH
JAN/02 12:00AM 1:00AM DTV125. 1
Your program setting is now stored.
• To set another program, repeat steps 2 to 7.
• To exit, press [TIMER] or [SETUP].
• When 2 or more programs are overlapped,
“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
• To correct the timer program refer to
“Checking, canceling, or correcting the timer
programming information” on page 41.
8 Press [STANDBY-ON y y ] to set a timer
programming.
• Press [STOP C] to stop recording.
TIMER RECORDING
E7H40UD_EN_v5.indd 40 E7H40UD_EN_v5.indd 40 2008/06/02 14:49:52 2008/06/02 14:49:52