Philips DVDR600VR-37B - Manual (Page 29)

VCR Plus+ ® Channels 29
If you intend to use the VCR Plus+ ® programming system, program the
Recorder with your local channel information.This will only take a few
minutes. Since the channel numbers of the stations you receive may not be
the same as the station numbers, and since channel numbers differ from
area to area, you must set up channels in order for the system to work
efficiently.
Before you begin, make sure you have 1) a cable TV channel list, if applicable
(you can request one from your cable TV company), and 2) a chart that lists
VCR Plus+ channel numbers, which you can find in your TV guide or the TV
listings of your local newspaper.
● Make sure the Recorder is in DVD mode. Press DVD so the DVD light
appears on the front of the Recorder.
1 Press SYSTEM MENU. Press s s to select in the top left
corner of the menu bar at the top of the TV screen.
2 Press L repeatedly to select at the bottom of the
second menu screen, then press B to enter the Installation
menu.
3 Press K K or L L to select VCR Plus+ Ch. (channel), then press B B .
4 Press K K or L L to select a VCR Plus+ Ch. number, then press
s or B to enter the corresponding Channel number from
your TV guide list.
Refer to the list from your local newspaper or TV guide for the VCR
Plus+ channels and corresponding TV channel numbers for your
area.These are the numbers you will enter as the Channel number
as you complete the chart on the screen.
5 Press OK to store the Channel number. “Stored” will appear
briefly in the lower left corner of the menu. Repeat steps 4-5 as
often as necessary to complete the chart.
6 When you are finished, press SYSTEM MENU repeatedly to
remove all the menus.
STANDBY-ON
OK
MENU MENU
DISC SYSTEM
CHANNEL
TV/VIDEO
OPEN/CLOSE
DVD VCR CLEAR
MONITOR VCR Plus +/TIMER
RETURN SELECT
PLAY
STOP DVD REC VCR REC
PLAY MODE MODE AUDIO
DISPLAY T/C FSS SLOW
MODE
SEARCH
MUTE VOLUME
TV
PAUSE
1 2 3
4 5 6
7 8 9
0
EJECT
REC
Installation
Auto Ch. Programming
K Add/Delete Channels
u B VCR Plus+ ch. B
L Time/Date
Cable/Antenna
To exit press
SYSTEM MENU
Installation
VCR Plus+ ch.
VCR Plus+ ch. Channel
K K ...
u 001 s 018 B
L 002 -- -- --
003 -- -- --
004 -- -- --
005 -- -- --
L... To store
Press OK
1,6
1-5
• Only memorized channels will
be available at step 4.To add
more channels, see page 28.
Helpful Hint
Call letters
(Local TV station) Guide Channel
(Guide channel number) TV Channel
(Local channel number)
Channel Line-Up Chart
E9480UD_EN.qx3 05.1.8 4:16 PM Page 29