Philips BDH5011-74 - Manual (Page 30)

PIP Window SWAP
1. By default, the OSD will always display
DISABLE.To swap the main and sub
windows, use the ADJ +/- button to select
ENABLE.
Once the swap is complete, the OSD will
return to display DISABLE.
Screen Rate (Aspect Ratio Control)
1. When POP (Side-by-side) picture is enabled,
you can change the aspect ratio for the
image displayed.
2. Choose FULL to show a full screen image.
The displayed image will be distorted
because the display has to manipulate the
image so that it fits within the smaller
window.
3. Choose 4:3 to show an image in 4:3 aspect
ratio within the POP windows. Small black
bars are added in order to obtain a 4:3
aspect ratio.
4. Choose 16:9 to show an image in wide-
screen aspect ratio within the POP windows.
Small black bars are added in order to obtain
a 16:9 aspect ratio.
POP Window SWAP
1. By default, the OSD will always display
DISABLE.To swap the main (left) and sub
(right) windows, use the ADJ +/- button to
switch to ENABLE. Once the swap is
complete, the OSD will return to display
DISABLE.
30
User Manual BDH5011