Philips widescreen flat TV 50PF9956 127 cm 50" plasma Progressive Scan - Manual (Page 20)

16
There is a wide range of audio and video devices that can be connected to your TV.The following
connection diagrams show you how to connect them to the TV.
AV1 can handle YPbPr,Y/C and CVBS; AV2 YPbPr (RGB), CVBS and Y/C; AV3 (HDMI) ; Side : CVBS and Y/C.
& Connect the RF Antenna or Cable TV cable (eventually
via an optional two-way signal splitter and/or Cable TV
converter box) 1 to the
RF IN socket of your
recorder.
é Connect another RF cable 2 from the output OUT of
your recorder to the TV’s input 75 ø x jack.
“ Better playback quality can be obtained if you also
connect the Video, Audio Left and Right (only for stereo
devices) AV cables 3 to the
CVBS , AUDIO L and R
input jacks of AV2 .
If your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable
with the
S-VIDEO input instead of connecting the
recorder to the CVBS jack of AV2 .
S-Video does not provide audio, so audio cables must
still be connected to provide sound.
AV2
R
L
V
H
Y/G
CVBS S-VIDEO
Pr/R
Pb/B
75
ANT IN
CABLE
RECORDER
OUT IN
OUT
3
AUDIO
RECEIVER
MONITOR
OUT
AV1 AV3 AV2
R
L
V
H
S-VIDEO
S-VIDEO
Y/G
CVBS
Pr/R
Pb/B
R
L
Pr
Pb
Y
VIDEO
R
L
R
L
CENTRE
SUBW.
R
L
HDMI
75
ANT IN
5 6
RECORDER
MONITOR
OUT
AV1 AV2
S-VIDEO
S-VIDEO
R
L
Pr
Pb
Pr/R
Pb/B
V
H
Y/G Y
VIDEO
R
L CVBS
R
L
3
2
75
ANT IN
1
CABLE
4
OUT IN OUT IN
& Connect the RF antenna cable 1 of the RF IN socket
of your other AV device.
é Connect the RF output of the AV device to the RF input
of the recorder 2.
“ Connect another RF cable 4 from the output OUT of
your recorder to the TV’s input 75 Ohm x jack.
‘ To obtain better picture quality, also connect the Video,
Audio left and Audio right cables of both devices to
AV1
( Y or S-VIDEO , AUDIO L and R ,) 3 and to AV2
( CVBS or S-VIDEO , AUDIO L and R ) 5.
Note: in case of mono equipment, only the left loudspeaker
reproduces sound. Use a mono to stereo adapter (not
supplied) for sound reproduction via all internal loudspeakers.
The MONITOR OUT connector can be used for a daisy
chaining or to record programs from your TV 6. Only
when a recorder is connected to
MONITOR OUT it is
possible to record a program from other devices
connected to the TV.
See Record with your recorder, p. 21.
Recorder and other A/V devices
Recorder (
VCR
-
DVD
+
RW
)
Note: Do not place your recorder too close to the screen as some recorders may be susceptible for signals from the
display. Keep a minimum distance of 20” from the screen.
Connect Accessory Devices