Philips widescreen flat TV 50PF9956 127 cm 50" plasma Progressive Scan - Manual (Page 15)

11
The TV continuously measures and corrects all
incoming signals in order to provide the best
picture possible.
& Press the ACTIVE CONTROL button on the
remote control.
Note: Turn off all menus on screen.
é The Active Control menu appears.
“ Press the cursor up/down to select the Active
Control values
Off , Minimum , Medium
(recommended) or Maximum .
The picture settings are being optimized
continuously and automatically which is
displayed by bars.Those menu items can not be
selected.
‘ Press the cursor right to select Auto Picture .
( Press the cursor up/down to select one of the
predefined picture settings.
§ Press the cursor right to select Active
Display .
è Press the cursor up/down to select Show bars ,
one of the Dual screen demos or Off .When
you select Dynamic contrast, Digital Noise
Reduction or Digital processing, the TV screen
is divided into two parts: in the left part the
selected picture quality setting is switched off;
in the right part it is switched on.
Note: Dependent on the input signal, one or more
Dual screen demos may not be selectable.
! Press the ACTIVE CONTROL button again to
switch off the Active Control menu.
Note: Active Control is not available for digital
signals via HDMI.
Active Control
DNR (Digital Noise Reduction)
Automatically filters out and reduces the image noise and
improves picture quality when receiving weak video signals.
& Press the cursor right to enter the list.
é Select Off , Minimum , Medium or Maximum according to the
image noise.
“ Press the cursor left to return to the picture menu.
Color enhancement
When activated, this feature automatically controls green
enhancement and blue stretch. It makes the colors more vivid.
& Press the cursor right.
é Select On or Off in order to activate/de-activate Color
enhancement with the cursor right.
Tint
Allows you to select the color mix (hue) of the picture.
Picture format
This menu item performs the same as the SCREEN FORMAT
button on the Remote Control. See Use of the Remote
Control, p. 4.